Rock714
Filing Flight Plan
- Joined
- Aug 15, 2014
- Messages
- 23
- Display Name
Display name:
Rock714
Bit of a tricky problem. I have a GTN750 as my primary Radio/Nav. I have a second King KY196 Radio only. I have a 3rd Garmin GNC255 Radio/Nav. It looks something like this:
GTN750 Com 1 NAV 1
KY196 Com 2
GNC255 Com 3 NAV2
The KY196 Radio has failed. I want to leave the KY196 radio in the panel and use Com 1 and Com 3. I can use the Audio Panel menu on the GTN750 to monitor radio 1 & 3. I can also select the Mic for Com 1 and Com 3 from the audio panel menu.
However when I try to select Com 1 or Com 3 from the main screen it defaults to Com 1 or 2, same thing for the Mic button. It will only allow Mic 1 or Mic 2 from a primary screen.
Is there a programming method to make Com 1 and Com 3, Mic 1 & 3 the default?
Is there a programming method to disable Com 2?
Is there a programming method to relabel Com 2 and Com 3?
Garmin GTN 750
Main Software Version 6.41
GPS / WASS Software Version 5.2
Com Software Version 2.20
NAV Software Version 6.03
GTN750 Com 1 NAV 1
KY196 Com 2
GNC255 Com 3 NAV2
The KY196 Radio has failed. I want to leave the KY196 radio in the panel and use Com 1 and Com 3. I can use the Audio Panel menu on the GTN750 to monitor radio 1 & 3. I can also select the Mic for Com 1 and Com 3 from the audio panel menu.
However when I try to select Com 1 or Com 3 from the main screen it defaults to Com 1 or 2, same thing for the Mic button. It will only allow Mic 1 or Mic 2 from a primary screen.
Is there a programming method to make Com 1 and Com 3, Mic 1 & 3 the default?
Is there a programming method to disable Com 2?
Is there a programming method to relabel Com 2 and Com 3?
Garmin GTN 750
Main Software Version 6.41
GPS / WASS Software Version 5.2
Com Software Version 2.20
NAV Software Version 6.03