Caramon13
Pattern Altitude
Plane is a 1965 Piper Cherokee 180C, serial 28-2919.
I found this in the type certification for the plane:
The Model PA-28-180, S/N 28-671 through 28-5859, may be operated to the expanded C.G. envelope:
(a) For S/N 28-671 through 28-3072 by the installation of P/N 65280-00 tube - Landing Gear Strut
Piston in accordance with Piper Service Letter 567 and in accordance with FAA approved Airplane
Flight Manual Supplement No. 2, dated September 14, 1970, for Model PA-28-180 (Piper Report
VB-261).
(b) For S/N 28-3073 through 28-5859 in accordance with FAA approved Airplane Flight Manual
Supplement No. 2, dated September 14, 1970, for Model PA-28-180 (Piper Report VB-261).
My question is, where would that information be properly documented? I went through all the logbooks last night, nothing in there that says this was installed. Would it be in the POH or W&B?
If it's not there, is there a way to VISUALLY verify it's been installed?
Thanks
I found this in the type certification for the plane:
The Model PA-28-180, S/N 28-671 through 28-5859, may be operated to the expanded C.G. envelope:
(a) For S/N 28-671 through 28-3072 by the installation of P/N 65280-00 tube - Landing Gear Strut
Piston in accordance with Piper Service Letter 567 and in accordance with FAA approved Airplane
Flight Manual Supplement No. 2, dated September 14, 1970, for Model PA-28-180 (Piper Report
VB-261).
(b) For S/N 28-3073 through 28-5859 in accordance with FAA approved Airplane Flight Manual
Supplement No. 2, dated September 14, 1970, for Model PA-28-180 (Piper Report VB-261).
My question is, where would that information be properly documented? I went through all the logbooks last night, nothing in there that says this was installed. Would it be in the POH or W&B?
If it's not there, is there a way to VISUALLY verify it's been installed?
Thanks