Building an RV12

Discussion in 'Home Builders and Sport Pilots' started by AdamZ, Dec 15, 2013.

  1. bflynn

    bflynn En-Route

    Joined:
    Apr 24, 2012
    Messages:
    3,695
    Location:
    Fuquay Varina, NC
    Display Name:

    Display name:
    Brian Flynn
  2. Mike5250

    Mike5250 Line Up and Wait

    Joined:
    Apr 21, 2011
    Messages:
    882
    Location:
    Philadelphia,pa
    Display Name:

    Display name:
    Mike5250
    Rv12 is almost ready for final inspection. Cowlings are finished and the engine runs nice. Still need to do w/b and setup the garmin Pfd.
     
    SoCal RV Flyer, GRG55 and korben88 like this.
  3. EppyGA

    EppyGA Touchdown! Greaser!

    Joined:
    Jan 6, 2009
    Messages:
    10,122
    Location:
    Hoschton, GA
    Display Name:

    Display name:
    Let's Fly
    We're waiting on our wing kit. Crate date is 3/20. Going to order the light kit so the guys will have something to do for a few days.
     
    Mike5250 likes this.
  4. Mike5250

    Mike5250 Line Up and Wait

    Joined:
    Apr 21, 2011
    Messages:
    882
    Location:
    Philadelphia,pa
    Display Name:

    Display name:
    Mike5250
    Received our registration... N452US will be flying soon!
     
    rtk11 and EppyGA like this.
  5. EppyGA

    EppyGA Touchdown! Greaser!

    Joined:
    Jan 6, 2009
    Messages:
    10,122
    Location:
    Hoschton, GA
    Display Name:

    Display name:
    Let's Fly
    We finally got our wing kit. Van's was having QC issues with the spars. Our guys are back to work. Going to order the finishing kit soon.
     
  6. Mike5250

    Mike5250 Line Up and Wait

    Joined:
    Apr 21, 2011
    Messages:
    882
    Location:
    Philadelphia,pa
    Display Name:

    Display name:
    Mike5250
    Really, we never heard of any issues with the spars. We started a second kit too, I'll check that out. Wait till you see the AD list that you need to go through. Take a look at it before you install avionics. There is a wiring AD that applies to a Fuse not being wired properly to the elt or COM. Much easier to do that before your canopy is on and avionics are installed.
     
  7. CC268

    CC268 En-Route

    Joined:
    Nov 4, 2015
    Messages:
    3,460
    Display Name:

    Display name:
    CC268
    Lets see some pics!
     
  8. Mike5250

    Mike5250 Line Up and Wait

    Joined:
    Apr 21, 2011
    Messages:
    882
    Location:
    Philadelphia,pa
    Display Name:

    Display name:
    Mike5250
    I'll work on that!
     
    CC268 likes this.