Separate names with a comma.
I would say it’s not sold as an owner produced part but rather as the basis for one.
The aluminum is part to shape but holes need to be debarred...
You may want to check out a post from Avid Flyer on Piper Forum .
He made up kits as an Owner Produced Part and sells for about $60 .
Dual brake Cherokees have 5 Master Cylinders and can be a pia.
Pressure Pots didn’t seem to help much.
Even a Tee to both calipers was not a...
Doesn’t “ Annual “ mean it takes a year?
Could it be the perception of Lowell on “Wings”?
For a MIL view check out Dos Gringos recording of “I’m a Pilot”.
That was not my experience...
Someone I know worked on his aircraft for 30 + years.
This included involvement with Annuals , PM and fabric on one.
He also did a complete...
Unfortunately; most folks ignore the complete AD process until it’s time to write
A lot of things happen before that.
I’ve been in a number of clubs.
First Flight as $4 / hr wet
Later $7/hr in MIL Club with new Cherokees.
On line schedule with...
Parts Exchange is very competitive
We are not talking complex here.
OP is referring to a C-150.
I recently did a PB on one with a polished Prop.
My opinion is not...
It would be a good idea to scope out the AC sent by Doc to avoid surprises.
It specifically states that Tech School Time is not experience....
The ref to home field is not necessarily where you will base but where future
maintenance will be done.
My point is to avoid surprises at...
It looks like you should be all set.
FSDOs have a listing of AFSC/MOS with a job description.
However; that can vary over time and may not match...
My belief is that you should pursue type of alloy and source.
I’ve found metal from someone that must have thought a box wrench was better
You should be aware there is a small orifice ( .020 ish) for the OP that could
possibly become plugged.
I’ve seen some that are pressed-in...
Is the Seal still there?
Looks like you found the culprit.
IMHO Oil Analysis would not be the best tool here.
IF you really had 0 Oil Pressure you might have also noticed the Lifters clattering.
I doubt if the smell came from a Prop Seal.
Droplets on w/s is typical.
I had this happen to me once.
Thought it might be a toasted diode or...
Suggest you log all time that an A & P would charge for.
That includes Parts and Service info research, ordering parts and troubleshooting....
My suggestion is you involve the person that will do your First
Annual ( home field ) in the process
Have them review ADs etc before purchase....