Let'sgoflying!
Touchdown! Greaser!
This plasma cutter is tripping either GFCI receptacle (there are two available) on a generator as soon as the trigger is pulled.
The plasma cutter works fine when plugged into an ordinary 15A duplex in the barn.
The generator also has circuit breakers; it's not those which trip, it's the duplexs' gfci-s which trip.
Plasma cutter: (it's new)
ESAB (Thermal Dynamics) ie Victor according to their phone greeting
Cutmaster 42
https://mam.esab.com:8443/assets/1/...66217C518/V430150-en_US-FactSheet_Main-01.pdf
Generator: (3 years old)
Generac XG10000E 10mw their images show two 20A gfci duplex receptacles with their CBs
plus other receptacles.
http://pdf.lowes.com/dimensionsguides/696471058024_meas.pdf
The plasma cutter works fine when plugged into an ordinary 15A duplex in the barn.
The generator also has circuit breakers; it's not those which trip, it's the duplexs' gfci-s which trip.
Plasma cutter: (it's new)
ESAB (Thermal Dynamics) ie Victor according to their phone greeting
Cutmaster 42
https://mam.esab.com:8443/assets/1/...66217C518/V430150-en_US-FactSheet_Main-01.pdf
Generator: (3 years old)
Generac XG10000E 10mw their images show two 20A gfci duplex receptacles with their CBs
plus other receptacles.
http://pdf.lowes.com/dimensionsguides/696471058024_meas.pdf