Timbeck2's Recent Activity

  1. Timbeck2 replied to the thread Murder by....

    My girls are almost 22. (identical twins) When they were little and crying for no apparent reason, I totally understand why a parent...

    Oct 19, 2017 at 6:53 PM

  2. Timbeck2 replied to the thread Trick for bleeding brakes.

    I made my own for about $20 including the on/off ball valve with a garden sprayer from Home Depot.

    Oct 19, 2017 at 6:29 PM

  3. Timbeck2 posted a new thread.

    Fatal crash, Safford Arizona

    All I know is single engine, fixed gear. Took off from Gila Bend and was flying from California to Texas.

    Forum: Hangar Talk

    Oct 19, 2017 at 6:26 PM

  4. Timbeck2 replied to the thread Trick for bleeding brakes.

    Tried it and you end up with 12' of tube with fluid in it that you have to disconnect and drain somewhere. Read: It makes a mess.

    Oct 18, 2017 at 8:03 PM

  5. Timbeck2 replied to the thread Trick for bleeding brakes.

    Exactly the way I did it. Had a tube coming off the reservoir cap and into a drain bottle. I will add that while the pressure is on,...

    Oct 18, 2017 at 7:49 PM

  6. Timbeck2 replied to the thread Murder by....

    It's pronounced, poo-say. I have no idea why I know that.

    Oct 18, 2017 at 6:15 PM

  7. Timbeck2 replied to the thread Murder by....

    You mean Poussey Washington?

    Oct 18, 2017 at 5:39 PM

  8. Timbeck2 replied to the thread wanted... inop steam gauge instruments for "paper weights".

    "...I thought I'd see if there's a place to buy not working not repairable never gonna work again instruments for my desk..."

    Oct 17, 2017 at 10:28 PM

  9. Timbeck2 replied to the thread who wants burrito delivered via Drone?.

    Latinos are everywhere jefe'. ;)

    Oct 17, 2017 at 10:24 PM

  10. Timbeck2 replied to the thread Decomissioned VORs - why are they still on the charts?.

    Nowhere that I've been rated as a controller was I required to memorize equipment suffix codes. That being said, I make sure I'm...

    Oct 17, 2017 at 10:21 PM

  11. Timbeck2 replied to the thread Finally made a Pilots and paws flight.

    Umm, ya know guys that there's an entire forum dedicated to just that thing. It's called PilotsnPaws.org :)

    Oct 17, 2017 at 1:45 PM

  12. Timbeck2 liked Dan Thomas's post in the thread Engines that sit idle.

    There have been numerous threads on engine corrosion, and we've discussed the amount of atmospheric moisture that can possibly enter the...

    Oct 17, 2017 at 1:43 PM

  13. Timbeck2 replied to the thread Engines that sit idle.

    Forrest Gump voice on: "Dan always had a way of 'splainin thangs to me so that they make sense." Forrest Gump voice off

    Oct 17, 2017 at 1:43 PM

  14. Timbeck2 replied to the thread Daily Pic.

    Where do I sign up for that kind of "work?"

    Oct 17, 2017 at 1:27 PM

  15. Timbeck2 replied to the thread Taxiway/hangar floor paint.

    Now that you put it that way. Rattle can Rustoleum (I used red) has lasted over two years for me so far.

    Oct 16, 2017 at 9:25 PM
Show older items