I installed an AeroCruze 100 in my PA28-140 recently and had a similar problem with the turn. My airplane would track a heading, but then start a shallow right turn that got progressively steeper. The screen showed the proper desired heading and it showed that the airplane was in a turn...it...
Okay, looks like the baffle is not likely the issue. Talked with the engineer at Power Flow Systems and they said that a missing baffle should not cause this kind of issue. Looks like I am back to fuel system troubleshooting. Thanks for all the replies.
Thanks. I have a powerflow muffler. This could be the problem...I checked the muffler and the baffle is missing. It is all making sense now. A few flights ago my passenger asked if I heard something hit the bottom of the airplane on landing. I didn't, but he swore he heard something. We...
There are vents. I will check them today when I go to the hangar. What concerns me is that both sides have done it now. I have owned this airplane for a while and I have always "trusted" it. Now I am concerned about flying it. Thanks for the suggestion.
Hi Everyone,
I apologize in advance for the long post, but I (and a few A&Ps) am stumped and looking for a troubleshooting starting point. Here is what I am trying to fix:
A few weeks ago I did a new weight and balance. Tanks were emptied and aircraft weighed...all is good. Refilled tanks...
I hope this is the correct forum. I have an old Narco Com 10 that I wanted to install in an old C150 for a friend as a second Com radio (he is time building on a very tight budget). Although it is old, it works perfectly. However, I cannot find the pinouts/install manual for it anywhere. Any...
Thanks for the reply. In this case he did and they refuse to supply a permission letter or instructions. They don't want to deal with the liability, which I can understand. It looks like I will need to buy something else.
Does anyone have the BAS should harness kit installed in a PA28-140? Just curious how labor intensive it is to have installed. I saw another set from a different manufacturer that required a large bracket to be installed...but the BAS set looks like it attaches to points already installed on...
Any chance you have the install instructions. I know a person that is parting-out a Cherokee 140 that has these installed...but he doesn't have the instructions. I don't want to invest the money if I can't install them. Any help would be greatly appreciated. Thanks.