Head: Up and locked...

gkainz

Final Approach
Joined
Feb 23, 2005
Messages
8,399
Location
Arvada, CO
Display Name

Display name:
Greg Kainz
I flew 48V to KCUT to visit my dad in the hospital this weekend, who is starting to show signs of improvement in his condition. Yeah! But, instead of flying direct to Rapid City and bumming a ride to the hospital, my brother in law asked that I come to Custer so we could drive to Rapid City and discuss a number of family issues that are going to need attention soon along the way. Of course, this started the mental wheels turning and began the distractions.

I noticed it was taking me a bit longer than usual to get my act together at home in the morning. Reading thru the weather required a number of passes on the same information to actually "get it".

I rented a C-172RG Cutlass that I've been flying for a while, and am comfortable with this plane. Preflight went smoothly... except for "I wonder why the hydraulic reservour is not on this checklist? Did I miss it? Hmmm, nope, it's not on the list. Oh well, check it anyway."

"Plenty of fuel to get to Custer with plenty of reserve, but I might as well fill here, since it's cheaper than Custer. Then I can do a round trip without refueling." So, we tow the plane over to the fuel pumps for a fillup, which put me a little behind my desired schedule. However, since my brother in law lives near the airport, he doesn't drive over to pick me up until he hears me go overhead, anyway.

So, all fueled up, startup, taxi and runup are all routine and normal. "Beep, Beep, Beep...rats! GPS batteries are low. Oh well, I'll change them once I'm on my way." Everything else looks good, the weather's great and it's a good day to be flying. I announce departure, take position on 33 and give everything a quick check. All looks good, so power up and we're rolling. Cool! It sure feels good to be flying again! Airspeed's alive, everything's normal. there's 55, rotate, and accelerate to 80.

"Oh yeah," I remember, "they want us to modify our north departures now for noise abatement for the new housing developments that are surrounding the airport. Ok, glad I remembered that for an early Saturday morning." So, I roll the RPMs back to 2400, turn west between the houses to the road, then north a little, west again and then north to my departure heading. "OK, where was I? Oh yeah, Climb checklist ... there it is, Enroute Climb: normal speed: 86-95, check. Prop: 2500, ok we're clear of houses, back to 2500 RPM. Throttle: 25", yeah right ... 23" is the best we're getting at 7000'. Carb heat: cold, check. Mixture: set for 50° ROP EGT, Cowl flaps: open, check."

Something's still not quite right here, but I can't quite put my finger on it. So, climb up to 8500, level off, and we'll see what we get for airspeed today. Quartering tailwind at 20 knots ought to help a bit this morning, but I'm sure I'll pay it back coming home. So, Cruise checklist: Prop: 2100 - 2700 RPM, 2400 feels good so check. Power 15"-25": indicating 22", check. Trims: adjust. Cowl flaps: Closed, check. Ok, so why am I only getting 110 knots here? Ok, flow check... Throttle, check. Mixture, reset to 50° ROP EGT, check. Flaps are up, cowl flaps are closed, gear is down and green. Airspeed still indicating 110 knots. One more time, flow check... until I get to gear - down and green... DUH!!!! Aw crap! Hope nobody saw that on departure! 110 knots - still ok for gear, so "gear up" .... ka-thunk, ok, gear up and indicating... and, to quote Jackie Gleason "away we go!" Ah! 130 knots! That's more like it!

I realized that I let the noise abatement distract me from my takeoff and climb checklist and completely missed "gear up". And then the second realization was "If you can miss 'gear up', you had better pull your head out and make a HUGE mental Post-It note to not forget the gear DOWN at Custer!" :)
 
Good post Greg. Do you think the family issues might have distracted you as well? Its amazing what even a little stress will do to our heads.
 
I had that happen to me once when departing Auga Caliente. I heard a pop sound, and decided to turn downwind and land. When i reached base, the sound was gone, and all seemed fine. I was planning on a short fuel hop, maybe 25 miles, so i decided against landing and continuing on to my fuel stop. When i reached the destination airport and went to lower the gear, it was already down. DOH. The whole way there i was saying to myself, this doesnt feel right, i shouldve landed. I realized then why it didnt feel right.

Thanks for reminding us Greg. Good post.
 
I've never done anything like that. Just don't ask the wife why it took os long to get over RMNP a couple Christmases ago. Same thing, distractions.
 
RotaryWingBob said:
I guess we'd be hard pressed to find a pilot who's never been distracted. The trick is, as you did, to get past it!

I've done the same thing as well (left the gear down and wondered why the climb was less than usual) in my Bonanza and once or twice I've gone a long way in the Baron wondering why my cruise speed is a few knots below normal because the cowl flaps were open. :redface: Besides using checklists, the best advice I can give is to periodically run over the whole panel and check the position of everything. Now if I could only remember to do that everytime I forget something else.:D
 
The dump valve for the gear hydraulic system (aka emergency gear valve) on my plane is on the side of the center console, right next to my knee. I've lost count of the number of times that I've managed to dislodge that on the ground... resulting in the gear failing to retract when the gear switch is moved. Resetting the dump valve fixes the issue (one of these days, a simple rubber band is going to fix the issue...).

Do the words "climbs like a pig" mean anything?
 
wsuffa said:
Do the words "climbs like a pig" mean anything?

Can't be as bad as a 180 hp C-172N with 30 degrees of flaps hanging out in the breeze. :D Don't ask me how I know.
 
Ghery said:
Can't be as bad as a 180 hp C-172N with 30 degrees of flaps hanging out in the breeze. :D Don't ask me how I know.
If that's what a pig climbs like, then an elephant must climb like a 152 with 30 degrees of flaps out. :D
 
Greg,

Glad you got to fly instead of drive. Just remember, even with the gear down its still faster than driving. :)
 
Anthony said:
Greg,

Glad you got to fly instead of drive. Just remember, even with the gear down its still faster than driving. :)
Yessireee! 1.8 hrs up and 2.3 back vs 6.0 each way in the car (or worse, depending on that lovely stretch of windblown hell called I-25 between Chugwater and Orin Junction...)
On a cool note, my dad got moved out of ICU yesterday to standard care! Wahoo!
 
wsuffa said:
The dump valve for the gear hydraulic system (aka emergency gear valve) on my plane is on the side of the center console, right next to my knee. I've lost count of the number of times that I've managed to dislodge that on the ground... resulting in the gear failing to retract when the gear switch is moved. Resetting the dump valve fixes the issue (one of these days, a simple rubber band is going to fix the issue...).

Do the words "climbs like a pig" mean anything?
Bill,

At least you've got the turbo. I think us straight 112's might be SOL. :D

-Rich
/keeping eye on right knee from now on...
 
Better to leave the gear up for climbout than to leave them down for descent and landing.
I just started flying an Arrow, and I'm having nightmares already about leavinf the gear up when I finally take the plane for my first X/C.
GUMPS GUMPS GUMPS
 
rpadula said:
Bill,

At least you've got the turbo. I think us straight 112's might be SOL. :D

-Rich
/keeping eye on right knee from now on...

Not that much difference in HP, unless it's a high DA situation....

For me, I gotta keep careful watch with that turbo because airspeed = airflow = cooling for the engine. The turbo makes it worse.
 
deafsound said:
Better to leave the gear up for climbout than to leave them down for descent and landing.

I realize you are new at this, but I think you'd better switch your thinking around:D.
 
lancefisher said:
I realize you are new at this, but I think you'd better switch your thinking around:D.
My got the best of dyslexia me. heh.
 
bluesky74656 said:
If that's what a pig climbs like, then an elephant must climb like a 152 with 30 degrees of flaps out. :D

Unless the airborne pachederm is Jumbo.
 
deafsound said:
Better to leave the gear up for climbout than to leave them down for descent and landing.
I just started flying an Arrow, and I'm having nightmares already about leavinf the gear up when I finally take the plane for my first X/C.
GUMPS GUMPS GUMPS

Midfield downwind - 3 IN THE GREEN
Turning base - 3 IN THE GREEN
Turning final - 3 IN THE GREEN
Short final - 3 IN THE GREEN

It's been 3 1/2 years since getting my complex endorsement in the Arrow and I still hear my CFI's words every time.
 
Back when the earth was still cooling, I was a student pilot in the US Air Force. During a formation flight in T-38s, I kept having trouble staying on the wing of the lead aircraft. I had to use short bursts of afterburner to keep up. Not good, burning way too much fuel! I finally realized I'd have a better time if I retracted the speed brakes.
 
Last edited:
2E14E846-9727-4D06-BDC6-CFD23838E93C.gif
 
Back when I was doing my PPL, the only plane that was available one day was a 172 RG. So, we took the 172 RG. "Don't touch that gear lever!!"

I rented one later after I got my PPL, complex and HP endorsements. Even with the gear up, it still flew like a turd.
 
Back when the earth was still cooling, I was a student pilot in the US Air Force. During a formation flight in T-38s, I kept having trouble staying on the wing of the lead aircraft. I had to use short bursts of afterburner to keep up. Not good, burning way too much fuel! I finally realized I'd have a better time if I retracted the speed brakes.

I had that on my form checkride. At Laughlin we normally took off to the south and did a 180 to the T-38s are to the north. I am leading first, and we are departing north, and I do an intermediate level off, but stupidly, BELOW the cloud deck. We get into the area and start some airwork and realize it would be better to climb above the deck. Not climbing well, can't figure it out.

In the debrief the check pilot noted the speed brakes were partially deployed. It seems he had bumped them open. And on the T-38, the rear speed brake switch overrode the front, so my switch was in the retract position, but they were out a bit. And I argued, that my wingman should have told me. :) I got a Good, but leveling off low and that cost me an Excellent. :(
 
Going to AB doesn't auto retract speed brakes on a T38? I know nothing about fighter-type aircraft but bizjet types (at least the ones I fly) auto retract SBs with thrust above a certain level. In fact it is on the preflight checklist to extend speed brakes, verify extension, quickly go to max thrust and back to idle, verify retraction.
 
Going to AB doesn't auto retract speed brakes on a T38? I know nothing about fighter-type aircraft but bizjet types (at least the ones I fly) auto retract SBs with thrust above a certain level. In fact it is on the preflight checklist to extend speed brakes, verify extension, quickly go to max thrust and back to idle, verify retraction.

Not back in 1969, anyway. It may have been updated since then. My classmates made fun of me for a long time.
 
Nope, speed brakes can be activated at any speed, and will remain open until you close them.

The caveat is that instructor speed brake switch over rides the student switch, until the student cycles the switch. So student switch is in Closed position. Instructor deploys part or all. They stay that way until the student cycles their switch to open then back to closed.
 
Nope, speed brakes can be activated at any speed, and will remain open until you close them.

The caveat is that instructor speed brake switch over rides the student switch, until the student cycles the switch. So student switch is in Closed position. Instructor deploys part or all. They stay that way until the student cycles their switch to open then back to closed.

Is there an operational scenario where you would want brakes and ABs at the same time or is this simply a manner of being easier to leave it to the pilot to figure out versus engineering a interconnect between two independent systems?

The logic for having the interconnect in the Citations is that it could be a safety issue if the pilot has speed brakes out on approach (for whatever reason) and decides to go around but forgets to retract them. But I'm guessing the T38 has enough thrust that it would be a lot less of a performance issue in that scenario (at least with both engines turning)
 
Is there an operational scenario where you would want brakes and ABs at the same time or is this simply a manner of being easier to leave it to the pilot to figure out versus engineering a interconnect between two independent systems?

Hehehe... as I described above, I needed to use afterburner because I had forgotten to retract the speed brakes. That's an "operational scenario" but not a desirable one. Yes, the T-38 has enough thrust with both engines to overcome the speed brakes. The problem would be running out of fuel. It doesn't have that much to start with.
 
Can't be as bad as a 180 hp C-172N with 30 degrees of flaps hanging out in the breeze. :D Don't ask me how I know.
I've had that happen to me as well. We did a touch and go on runway 23, airplane wasn't climbing much and I looked out and saw the flaps were still down. I took the controls from the student and just leveled off and turned left to land on runway 31. Flap switch had failed.
 
I talked to a guy who flew wing in airshows in a -104. Lead owned the planes. Was not a smooth lead, so wing flew boards and burner to have quicker response to speed changes by lead.
 
Old Thread: Hello . There have been no replies in this thread for 365 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top