The older mountain bike thread but now a road bike review update

Sac Arrow

Touchdown! Greaser!
Joined
May 11, 2010
Messages
20,260
Location
Charlotte, NC
Display Name

Display name:
Snorting his way across the USA
I got a bike the other day. A road bike. I've been pretty much road exclusive since 2012 when my nice Raleigh mountain bike from more than ten years earlier succumbed to stress corrosion cracking to its aluminum frame.

I liked that bike. It was fairly light. It ran 26" x 2.1" tires (presta valve), had a great front suspension, and was just a perfect all around bike for back trails, sand, muck, and whatever, and you could ride it all day.

In the bike store, they had a lot of mountain bike offerings. They were all MASSIVELY HEAVY. With ENORMOUS tires. Enormous heavy tires. Kind of like the strictly downhill MTB offerings of two decades ago. Not something you want to pedal uphill. Even the $$$$$$ carbon frame MTB's are the same way.

It's precisely the reason why I wouldn't buy a modern mountain bike. The Other Person owned a steel framed Diamondback from the early '90's, which unfortunately was stolen. To me, that was one of the most perfect mountain bikes. Lifetime frame. Indestructible. Not heavy at all, and FAR lighter than modern aluminum frames.

What gives?

Oh the road bike. A 2023* Cervelo 22 Caledonia with Shimano wireless DI2 shifters, hydraulic disc brakes, and about the best straight pull spoke wheelset you will get in an aluminum rim. I really wanted carbon but I can always swap that out later. What is on there is pretty nice plus it can still trip traffic light sensors. Sometimes.

*Edit - 2023, not 2013
 
Last edited:
Nice rant. I’m still rocking my Trek Alfa 4100 hard tail.

That is very similar to my former Raleigh M60 mountain bike. I wish I still had it but unfortunately, aluminum is not a lifetime frame material.

The problem with aluminum is that it can't be designed to flex. Well obviously our airplane wings flex but not like a bike frame. Modern aluminum frame bikes are generally so stout they weigh a ton.
 
Somewhere about ten years ago, they came up with this new concept called a "gravel bike."

It's what I would call a hybrid, with slightly large, but lightweight wheels and 700cX43 or so tires...

My new Trek carbon bike is super light and rides like a rock, but it has climbing gears, so weight is not really an issue.

Oh yeah, the average $2500 decent bike is now a $4200 bike. Yeesh!

EDIT: Steel Is Real!
 
Was going to suggest Gravel bike as well. Basically a cyclocross bike that leans more to road geometry. Oh and nothing wrong with your local bike shop, but they tend to stock to a lowest common denominator. That tends to heavy, big tires and stupid saddles on bikes that will be ridden once if ever.
 
The problem with aluminum is that it can't be designed to flex.

Interesting. This is my current road bike, an aluminum 2013 Cannondale Synapse:

14496893469_b26a18634c.jpg


It sure looks like the seatstays are curved to provide some flex, combined with flattened chainstays to allow some flexibility as well. Nothing like real suspension, but I must assume it’s designed that way to soften the ride a bit. And at 22 lbs or so, it’s far from the lightest out there, but not what I would call heavy.
 
I started mt biking in the early 90’s. Today’s mountain bikes are light years ahead of what was available then. No idea what you’re looking at but, I would guess you’re in the wrong place.

Now ebikes, they are what is wrong with this world!
 

Attachments

  • 52E552D0-C389-485D-8C38-A9D50D5C5B9E.jpeg
    52E552D0-C389-485D-8C38-A9D50D5C5B9E.jpeg
    244.6 KB · Views: 36
Now ebikes, they are what is wrong with this world!

I never quite got the point of eBikes - until 2 friends got them and I had a chance to try them out. To keep up with them I found a used Aventon Aventure:

52613675661_7d020d4280.jpg


I really enjoy riding it. At 60 lbs or so it’s a beast, but I can select as much or as little assist as suits my mood. Rides are more fun and less of a struggle on hills. They do have their place.
 
I never quite got the point of eBikes - until 2 friends got them and I had a chance to try them out. To keep up with them I found a used Aventon Aventure:

52613675661_7d020d4280.jpg


I really enjoy riding it. At 60 lbs or so it’s a beast, but I can select as much or as little assist as suits my mood. Rides are more fun and less of a struggle on hills. They do have their place.

I was being sarcastic. I’m a huge proponent of people enjoying the outdoors.
 
I got back into cycling this year after a 25yr layoff. I chose a Specialized Crux Comp, a drop bar gravel bike that I’m using as an endurance road bike. So far so good, but I’m finding that on faster road rides I’m running out of gear. Like most new Mountain and gravel bikes (and even some road) it’s a 1x chainring, so it’s a 1x11, and my top gear is 40 x 11.

I love the frame, so I’ll soon be going down the road of re-doing the drivetrain. I’m thinking SRAM etap force with a 33/46 front and a 10-36 12sp cassette.
 
Road bikes don't have much concern for going off of 2' drops or being slammed into tree roots every ride. The frame has to be beefier, and the front and rear suspension have to be stout, tires larger/wider with puncture resistant tread. All of those things add weight. My XC (Trek Superfly FS8) mountain bike isn't too heavy, but it's not going to win any downhill contests against bikes with 140+mm travel. If money were no object I'd have something like the Trek TopFuel bikes which are carbon and have amazing suspensions that I'd have no ability to get the most out of, lol. I'm not willing to drop $4K for those, either.
 
I got back into cycling this year after a 25yr layoff. I chose a Specialized Crux Comp, a drop bar gravel bike that I’m using as an endurance road bike. So far so good, but I’m finding that on faster road rides I’m running out of gear. Like most new Mountain and gravel bikes (and even some road) it’s a 1x chainring, so it’s a 1x11, and my top gear is 40 x 11.

I love the frame, so I’ll soon be going down the road of re-doing the drivetrain. I’m thinking SRAM etap force with a 33/46 front and a 10-36 12sp cassette.

Yep. My Trek FX Sport 5 Carbon has that exact same setup 1X11 with a 40 tooth chainring. Before I ever rode it, I bought a 42 tooth ring, believing I would run out of gear. I am just now to the point where I have gotten accustomed to the bike and I really like the close ratio Shimano GRX groupset, so I will probably install the bigger chainring to move the gears up a sprocket or two an get a higher top gear.

I picked this bike for beating the hill climbs necessary for my riding routine, since I live on a hill. The lowest gear is a 40X42, so I am less than 1:1 for climbing. I'm not sure I can even pedal that fast, but hey, I can finally get up those steep ass roads without traversing!
 
…What gives?…
Mountain bikes have evolved to more full suspension downhill machines or are following the non-suspension obese tire fad. The straight-bar hybrid bikes are a tire-swap away from a simple, light off-road bike.

…Cervelo 22 Caledonia with Shimano wireless DI2 shifters, hydraulic disc brakes, and about the best straight pull spoke wheelset you will get in an aluminum rim...
The Caledonia w/di2 is on my super short list addition this year. My current ride is a full carbon frame/fork Giant that’s been around since 98 or 99. I found out this past year I would really like a tenth rear sprocket for climbing and by the time I spring for all that, I’m most of the way to the Caledonia.

Is it really as comfortable for long rides as reviewers say it is?
 
Mountain bikes have evolved to more full suspension downhill machines or are following the non-suspension obese tire fad. The straight-bar hybrid bikes are a tire-swap away from a simple, light off-road bike.


The Caledonia w/di2 is on my super short list addition this year. My current ride is a full carbon frame/fork Giant that’s been around since 98 or 99. I found out this past year I would really like a tenth rear sprocket for climbing and by the time I spring for all that, I’m most of the way to the Caledonia.

Is it really as comfortable for long rides as reviewers say it is?

It's pretty comfortable but I have yet to put a decent ride on it (crappy WX.) The rear sprocket is actually a 12 speed, with an 11 34 cassette. The front is 52 36 which gives it pretty close to a 1:1 ratio in the lowest gear. My Tarmac has an 11 28 cassette, which limits its climbing ability. The other thing is that the disc brakes are huge - I've done a couple mountain descents in Napa where I simply didn't have enough braking, period, on the Tarmac, as to where I had to actually zig zag on the downhill. That's a non issue with disc brakes.

Electric shifting is fairly standard in all of the class of bikes I was looking at. I kind of consider it a gimmick, but it's growing on me. The weight penalty is fairly minimal, and there's no (I think) periodic adjustments since there is no cable stretch.

I wish it shipped with better wheels than it came with, but the straight pull DT Swiss wheelset is about as good as you're going to get short of a decent carbon wheelset. I can upgrade later I guess. It's still better than the ten year old Mavic Krysriums I ran on my Tarmac, which was actually a pretty good wheelset.

Okay that is a separate rant in itself - the Mavic wheelset. I got it on Ebay for cheap shortly after I got the Tarmac, and it basically made it a whole new bike. I can't complain too much, I got nearly 35,000 miles of service out of them. Then, a couple weeks ago, I broke a rear spoke about a mile from home. I was able to limp home. No problem - I'll just take the rear wheel to the LBS and they will throw a new spoke on it right?

Wrong. Mavic stopped making those wheels, and the spokes for them. LBS suggested I try Ebay. I tried Ebay and everywhere else. I was able to find spokes, just not rear drive side spokes, which was what broke. I could not find rear drive side spokes because those are the only spokes that break. I ended up going to another LBS specializing in older bikes, and ended up putting on an intact set of used beater Mavic rims of a slightly newer generation. It's basically now a backup bike, so I'm not too worried about breaking more spokes although I can tell two have already been replaced. The bottom line is Mavic is on my s**t list, and I wouldn't have put another set on my old bike but it was the best they could do me. The other choices were much older J spoke loose bearing wheels.
9D48B472-1A4A-46DC-91C8-2B2A4B50B0FB.jpeg
 
Last edited:
Mountain bikes have evolved to more full suspension downhill machines or are following the non-suspension obese tire fad. The straight-bar hybrid bikes are a tire-swap away from a simple, light off-road bike.

I put a nice set of Schwalbe 35s on my bike before I ever rode it. The weird, puffy 43s that came with the bike looked completely unsuitable for road use...
 
I picked this bike for beating the hill climbs necessary for my riding routine, since I live on a hill. The lowest gear is a 40X42, so I am less than 1:1 for climbing. I'm not sure I can even pedal that fast, but hey, I can finally get up those steep *** roads without traversing!

Right, my lowest gear is a 40x42 as well, which is .95:1, good for climbing. I need to maintain a sub 1:1 climbing gear as our hills aren't long, but some are steep. I did a 3mi 10% climb Tuesday, and even with the 40x42 it was a *****. (At least at my present fitness level)

I like the SRAM x-range gearsets, with the set I'm looking at my top gear would go from a 40x11 to a 46x10, or about 4.6:1. That's maybe a hair short of road bike top gearing, but close enough. On the bottom, I'd have a 33x36, which is a .91:1, so I'd still have a good climbing gear as well. Sounds good to me.
 
It's pretty comfortable but I have yet to put a decent ride on it (crappy WX.) The rear sprocket is actually a 12 speed, with an 11 34 cassette. The front is 52 36 which gives it pretty close to a 1:1 ratio in the lowest gear. My Tarmac has an 11 28 cassette, which limits its climbing ability. The other thing is that the disc brakes are huge - I've done a couple mountain descents in Napa where I simply didn't have enough braking, period, on the Tarmac, as to where I had to actually zig zag on the downhill. That's a non issue with disc brakes.

Electric shifting is fairly standard in all of the class of bikes I was looking at. I kind of consider it a gimmick, but it's growing on me. The weight penalty is fairly minimal, and there's no (I think) periodic adjustments since there is no cable stretch.

I wish it shipped with better wheels than it came with, but the straight pull DT Swiss wheelset is about as good as you're going to get short of a decent carbon wheelset. I can upgrade later I guess. It's still better than the ten year old Mavic Krysriums I ran on my Tarmac, which was actually a pretty good wheelset.

Okay that is a separate rant in itself - the Mavic wheelset. I got it on Ebay for cheap shortly after I got the Tarmac, and it basically made it a whole new bike. I can't complain too much, I got nearly 35,000 miles of service out of them. Then, a couple weeks ago, I broke a rear spoke about a mile from home. I was able to limp home. No problem - I'll just take the rear wheel to the LBS and they will throw a new spoke on it right?

Wrong. Mavic stopped making those wheels, and the spokes for them. LBS suggested I try Ebay. I tried Ebay and everywhere else. I was able to find spokes, just not rear drive side spokes, which was what broke. I could not find rear drive side spokes because those are the only spokes that break. I ended up going to another LBS specializing in older bikes, and ended up putting on an intact set of used beater Mavic rims of a slightly newer generation. It's basically now a backup bike, so I'm not too worried about breaking more spokes although I can tell two have already been replaced. The bottom line is Mavic is on my s**t list, and I wouldn't have put another set on my old bike but it was the best they could do me. The other choices were much older J spoke loose bearing wheels.
View attachment 113792


Thanks. I’ve asked my Cervelo shop to let me know when they get a Caledonia in (new or used) to go for a test spin. I’m also considering Giant Defy series bikes.

I’m resigned to electronic shifting going forward, but seems like a lot of handlebars today won’t allow a computer and a headlight, so that’s next of my list of stuff to learn about.
 
Thanks. I’ve asked my Cervelo shop to let me know when they get a Caledonia in (new or used) to go for a test spin. I’m also considering Giant Defy series bikes.

I’m resigned to electronic shifting going forward, but seems like a lot of handlebars today won’t allow a computer and a headlight, so that’s next of my list of stuff to learn about.

The Caledonia has conventional bars and seatpost so computers and lights are a non-issue. It has a slot in the front bar bracket and an adapter kit so you can mount a Garmin device forward of the bars. The problem with it is that it is only held on by a single small screw. You can however get aftermarket front clamps that have an integrated Garmin mount which are pretty slick, as well as bar mount adapters that have the same functionality. I've run a Cateye cycle computer on my two previous bikes. They are nice for a heads up speed and distance reading, but for everything else I use a Strava iphone app to record and log the ride. I don't plan on putting another Cateye on the bike, but I may well get a Garmin GPS to give me heads up speed and distance, and navigational mapping is a big plus too.

For lighting, I just run cheapie white flashers for the front and red flashers for the back that run off of watch batteries just for visibility in the darkness. If you want something that will actually light up your path, look for something in the 10,000 lumen range (that's what the guy at the bike shop recommended.) They are actually pretty light weight these days with LED bulbs and lithium ion batteries. I don't do much night riding other than an occasional pre-dawn start.
 
For computer/GPS I’m so far very happy with the Hammerhead Karoo II. Very legible, even for old eyes, and loading routes is s snap.
 
The Caledonia has conventional bars and seatpost so computers and lights are a non-issue...
Good to know
…I've run a Cateye cycle computer on my two previous bikes...
I’ve run Cateye comps forever side by side garmin forerunners for maps and other data until Strava and ride with gps. I kind of prefer ride with gps for navigation.

I tend to geek out over data, so I want to be able overlay stuff like gear selections with grade, heart rate, and watts but that’s just the repressed triathlete in me. It’s not like I’m able to capitalize on that knowledge in real time, but I’d like to be able to see it all in real time.
 
This thread cost me money. Some jackoff ran over my road bike while it was mounted on a hitch carrier. Can't get the bike in the configuration I had. This thread reminded me to order a frameset to recreate the destroyed bike.
 
This thread cost me money. Some jackoff ran over my road bike while it was mounted on a hitch carrier.

I’m almost thinking of buying a minivan so the bikes can ride inside where they’re safe and secure
 
I’m almost thinking of buying a minivan so the bikes can ride inside where they’re safe and secure

I've always had some form of truck based SUV or pickup with camper shell on it but not currently. I can transport a bike in the Sentra with the seat folded and the front wheel off. A minivan would work, but... it's a minivan.
 
I’m almost thinking of buying a minivan so the bikes can ride inside where they’re safe and secure

I do have a truck with a bike rack in the bed, but I also drive an ungodly number of miles each year so I have a daily driver for the commute. Most of my biking is after work, so the bike has to travel on the daily driver.
 
I've always had some form of truck based SUV or pickup with camper shell on it but not currently. I can transport a bike in the Sentra with the seat folded and the front wheel off. A minivan would work, but... it's a minivan.
Lol I drive the largest production SUV ever made and I still use a Kuat hitch-mounted bike rack. I don't want to mess with pull tires off or getting the interior covered in mud after a ride on the trails.
 
Right, my lowest gear is a 40x42 as well, which is .95:1, good for climbing. I need to maintain a sub 1:1 climbing gear as our hills aren't long, but some are steep. I did a 3mi 10% climb Tuesday, and even with the 40x42 it was a *****. (At least at my present fitness level)

I like the SRAM x-range gearsets, with the set I'm looking at my top gear would go from a 40x11 to a 46x10, or about 4.6:1. That's maybe a hair short of road bike top gearing, but close enough. On the bottom, I'd have a 33x36, which is a .91:1, so I'd still have a good climbing gear as well. Sounds good to me.

Today's ride (LNX GUY on Strava) was a real eye opener for me. This was my fourth ride on the Trek and I have run out of gears. I have worked out the necessary adjustments to the shifting and gotten used to the short top tube, so I have become more comfortable and much faster! I really like the close ratio shifting with the 11-42 cassette, but there is a gap between the top three gears that I hope will change when I replace the 40T chainwheel with the 42T.

Before I ever rode this bike, I bought a bigger chainwheel, anticipating that I would run out of gear at top speed. Yep. I'll be putting that on before the next ride. I do prefer the single gear to a 2X11 or 3X9, or whatever. I can feel the pulsations coming from that 11 tooth sprocket and it bothers me. The 42T will get me up at least two sprockets and put me back into the close ratios that make this configuration so nice.

I almost bought one of those Cervelos with all the electronic shifting and hydraulic brakes at a bike shop in Austin, but I chickened out, due to the price equaling almost three mortgage payments...

I did the road from Cherokee, NC to the Appalachian Trail Gap on the Tennessee border (US 441) on a bike with only eight gears, so all this high tech stuff is sorta cool and mostly necessary, since I am old and decrepit now. :cool:
 
I've always had some form of truck based SUV or pickup with camper shell on it but not currently. I can transport a bike in the Sentra with the seat folded and the front wheel off. A minivan would work, but... it's a minivan.
Going through a divorce?
 
Fat tire mountain bikes were originally meant for down hill. Like, ride the chair lift at a ski area off season and ride down.
On anything other than flat ground they were a tank.

e-bikes are, well, e-bikes. No question they get average people out on the bike path. They're fine until you run out of "e", when they become a 60 lb bike. They are also ridiculously expensive. I've owned many great motorcycles that I didn't pay that kind of money for.

I would actually love some kind of trials weight e bike that hauled serious a** when appropriate. You can keep the pedals and skip the "assist" punchline
 
Going through a divorce?

I went through a bitter divorce with the company Ford Explorer when it smashed in to another car. Long story, but I ended up replacing it on my own dime. Just not with another Ford Explorer.
 
Today's ride (LNX GUY on Strava) was a real eye opener for me. This was my fourth ride on the Trek and I have run out of gears…

Nolanville hill?
 
@Bill and @IK04 Think you are both running up against the limits of a 1X on the road, particularly if you are in hilly territory. The weight of the rear Cassette gears needed really offset the minor added complexity of having 2 chainrings. On gravel full time, there's some benefit and you see the guys that race gravel running 1X. Not trying to be critical of your choices, just pointing out the limitations.

It's nice having my 52X11 when the wind is at my back and I want to put the hammer down. I can also throw a 39 on the inner side if I am out of FL and in hills.
 
Interesting. This is my current road bike, an aluminum 2013 Cannondale Synapse:

14496893469_b26a18634c.jpg


It sure looks like the seatstays are curved to provide some flex, combined with flattened chainstays to allow some flexibility as well. Nothing like real suspension, but I must assume it’s designed that way to soften the ride a bit. And at 22 lbs or so, it’s far from the lightest out there, but not what I would call heavy.

Cannondale seems to be able to pull off aluminum road frames better than the others. They do use 6069 alloy, which is more fatigue resistant than 6061 which is more commonly used in bike frames. I did test ride one once, and it felt harsh to me. But that was an earlier generation, without carbon forks.
 
I don't think I've ever used 52x11 on a level road, and normally on a steep enough grade where I would use it, I'm coasting or braking anyway.
 
What's kinda funny is that the fastest time I have done on my regular workout loop was on my single speed bike. No gears at all...
 
An update on the Cervelo, I've finally been able to start riding again now that the WX has finally let up. I did a Burger Ride on Tuesday, and a 22 miler today. The whole time I'm thinking 'I could do this all day long.' Usually somewhere around mile 15 or so I find myself standing just to give my ass a rest, and to stretch out. I didn't find myself doing that.
 
So far I just passed 300 miles on the Caledonia 22. The Caledonia is Cervelo's endurance bike. An endurance bike is basically what used to be called sport touring bikes, which are race bikes but with relaxed geometry and more frame tube suspension flex.

Comparing it to the previous 2012 Tarmac mid compact (I still have it) the ergonomics are much more comfortable and the reach on the bars is more close in (e.g. more upright.) I don't really feel like I'm more upright than my riding stance on the Tarmac, but I'm not reaching at all. The handling is much better. It's more twitchy than the Tarmac, but it feels more planted in sharp and high speed cornering (probably due to the 30 mm wheels and suspension give.)

It has a lot of 'stuff' on it. You would think that with the 12 speed DI2 electric groupset with disc brakes it would be heavier than my minimally equipped Tarmac but it's not. It has the Ultegra DI2, which is lighter than the 105 DI2 but otherwise similar spec. It looks beefier than the SRAM Apex groupset but I guess they just use lighter metals, I don't know. So far, after 300 miles, the charge indicator shows between 51 and 100 percent of charge. Looking it up online, I'm seeing that one can expect between 2000 and 5000 km between charges. I've been riding mostly flats, so no real intense shifting yet. Once I shed some powerplant weight I will attack some hills and mountains. Shifting itself is, just push a button (lever) and it's done. No (**##$$# grinding shifts and overshifting, and throwing the chain. One thing I really HATED DOING on the Tarmac/SRAM was shifting the front in either direction. Often times going from the upper to the lower would result in throwing the chain and having to de-bike and pry the chain out and put it back on the sprocket. And the reverse was really hard to pull off without holding the lever extra long and extra far. On this thing it's just as easy and quick as shifting the rears.

I didn't think I'd like the stock wheels but I like them. It's a $6,000 bike. I sort of expect carbon rims on a bike of that class, but the DT Swiss straight pull spoke aluminum rims with 30 mm tires have less rotational inertia than the Mavic Krysriums with 25mm tires I've been running on the Tarmac. That's probably due to the disc brakes - the rims don't have to be designed to take a braking surface and a braking load. You have to be a little careful with the brakes. A fingerful is enough to lock them up. Two finger endos are possible with this bike. At any rate, I find myself shifting less and can accelerate better in a higher gear than I could in the Tarmac. The gyroscopics aren't there for stable hands-off riding but I'll take that any day of the week for quicker acceleration.

The ride quality is awesome. You could use it as a gravel bike if you wanted (it will take I think up to 34's) but things like bridge expansion joints and railroad crossings aren't cringeworthy events.

The other thing I like about it is that it has bolt-through axles (vs QR axles) but Cervelo puts a ratcheting lever on the bolt side so you don't need a special tool to unscrew it. Bolt-through axles are going to be fairly standard in bikes starting at that price range. It's a little bit more awkward to deal with than standard QR axles because you need to juggle a bike, an axle and a bolt at the same time, but it's a cleaner, lighter and stronger setup. I haven't taken the rear off yet (I need to take the front off to transport it in my car) but it might actually be easier to manage than a QR rear, if you have the bike upside down.

Anyway, that's my CYREP.
 
The bolt axles I'm pretty sure are mandatory with discs for alignment.
 
The bolt axles I'm pretty sure are mandatory with discs for alignment.

Not mandatory, but certainly probably should be. The Other Person owns an MTB with hydraulic discs and QR axles. And I helped a friend shop for a lower end cruising bike with cable discs and QR axles.

Better QR bikes have deep registration ridges that align the wheel precisely, but then you have to back the retaining nut way back to clear them, and Mickey Mouse with where to screw them back in so the clamping force is right. With bolt-throughs, once you get the bolt threaded in with the receiving nut, you're done and it's just torquing it down to the right amount (German torque, Gutentight) and you're done. And you don't torque down very much.
 
Back
Top