How often does ATC mis-categorize planes as VFR/IFR?

drummer4468

Pre-takeoff checklist
Joined
Jul 5, 2020
Messages
305
Display Name

Display name:
drummer4468
So I had a flight recently wherein I was out shooting some approaches in actual IMC. Just a quick out-and-back from A to B and went missed back to A. (A) is a towered field and tracon. I picked up my IFR clearance on the ground before taxiing out. Launched into the cloud deck and went on my merry way to (B) about 30ish miles away. Got cleared for the approach, which was uneventful as I went down to mins and started the published missed, which happened to take me back to the VOR colocated at (A).

So I called back "Approach, Skyhawk 12345 is on the missed, climbing 4000 back to (A)"
And I got "Skyhawk 12345 radar contact, proceed on course, maintain VFR"
"Skyhawk 12345 is IMC, can't maintain VFR"
"Oh, you're IFR?"
"Affirmative"
"Were you IFR on the way to (B)?"
"Yes, sir"
"OH..okay...sorry about that, fly heading 300 blahblahblah"

Not at all trying to make a 5-course meal out of a nothingburger, just trying to understand it from the ATC perspective. Him asking if I was IFR on the outbound leg(after the fact) leads me to believe it was more than a momentary brainfart. I was in hard IMC most of the flight and it was a little unsettling in the moment, even though I was at least on their radar. I'm still green in the IFR realm, so curious to hear what more knowledgable people have to say about it.
 
Meh...been there as well...not in actual IMC but was given IFR instructions once as VFR and had the same as you while IFR. It happens.
 
So I had a flight recently wherein I was out shooting some approaches in actual IMC. Just a quick out-and-back from A to B and went missed back to A. (A) is a towered field and tracon. I picked up my IFR clearance on the ground before taxiing out. Launched into the cloud deck and went on my merry way to (B) about 30ish miles away. Got cleared for the approach, which was uneventful as I went down to mins and started the published missed, which happened to take me back to the VOR colocated at (A).

So I called back "Approach, Skyhawk 12345 is on the missed, climbing 4000 back to (A)"
And I got "Skyhawk 12345 radar contact, proceed on course, maintain VFR"
"Skyhawk 12345 is IMC, can't maintain VFR"
"Oh, you're IFR?"
"Affirmative"
"Were you IFR on the way to (B)?"
"Yes, sir"
"OH..okay...sorry about that, fly heading 300 blahblahblah"

Not at all trying to make a 5-course meal out of a nothingburger, just trying to understand it from the ATC perspective. Him asking if I was IFR on the outbound leg(after the fact) leads me to believe it was more than a momentary brainfart. I was in hard IMC most of the flight and it was a little unsettling in the moment, even though I was at least on their radar. I'm still green in the IFR realm, so curious to hear what more knowledgable people have to say about it.
I don't think it happens a lot. What most likely happened is the Tower is so used to getting VFR aircraft conducting Practice Approaches, that an IFR aircraft conducting Practice Approaches just didn't register. There was probably a failure of communication between Approach and the Tower.

EDIT: Read it again. It was all Approach. Did you go back to the same Frequency on the miss that you were cleared for the Approach on? If so, did you recognize the same voice?

 
Last edited:
Did you go back to the same Frequency on the miss that you were cleared for the Approach on? If so, did you recognize the same voice?

I'm 99% sure I went back to the same freq, since I'd have no reason to dial up anything other than press the flip-flop button when leaving the CTAF. Didn't notice a different voice, but then again most male controllers in my area sound the same to me, lol.

It just took me off-guard having just gotten multiple IFR clearances, then being mistaken for VFR.
 
I'm 99% sure I went back to the same freq, since I'd have no reason to dial up anything other than press the flip-flop button when leaving the CTAF. Didn't notice a different voice, but then again most male controllers in my area sound the same to me, lol.

It just took me off-guard having just gotten multiple IFR clearances, then being mistaken for VFR.
I think maybe you hit on it in your OP. Flatulence de la Cranium.
 
1) did you actually file, or just get a clearance from your local tracon?
2) was it a 0 code?
3)I assume "b" was within the same tracon?

The times this has happened to me have been when I just get a pop-up or practice clearance from my local tracon. They put you on a "local" txdr code beginning with a zero or one and without a strip in front of them, they forget that you're actually ifr. When I file a flight plan and they actually have a strip for me, I have better results. Any more, I file through leidos even if I'm just doing approaches at my home airport. It takes just a couple minutes, and saves that time negotiating with clearance. It also saves them typing in my info (I think?) and they seem to be happier about it.
 
Yeah, I guess so. I just figured
1) did you actually file, or just get a clearance from your local tracon?
2) was it a 0 code?
3)I assume "b" was within the same tracon?

The times this has happened to me have been when I just get a pop-up or practice clearance from my local tracon. They put you on a "local" txdr code beginning with a zero or one and without a strip in front of them, they forget that you're actually ifr. When I file a flight plan and they actually have a strip for me, I have better results. Any more, I file through leidos even if I'm just doing approaches at my home airport. It takes just a couple minutes, and saves that time negotiating with clearance. It also saves them typing in my info (I think?) and they seem to be happier about it.

1) Yes, I actually filed and picked up the clearance on the ground
2 and 3) It was within the same tracon, but it was not a local code, started with a 5 iirc

That's what makes me curious. The mixup would make more sense if it was a pop-up that got hand-jammed in there, but I filed well prior and picked up said clearance before takeoff. I figured that'd make as official as it gets.
 
1) did you actually file, or just get a clearance from your local tracon?
2) was it a 0 code?
3)I assume "b" was within the same tracon?

The times this has happened to me have been when I just get a pop-up or practice clearance from my local tracon. They put you on a "local" txdr code beginning with a zero or one and without a strip in front of them, they forget that you're actually ifr. When I file a flight plan and they actually have a strip for me, I have better results. Any more, I file through leidos even if I'm just doing approaches at my home airport. It takes just a couple minutes, and saves that time negotiating with clearance. It also saves them typing in my info (I think?) and they seem to be happier about it.
I've seen it happen with filed flight plans. Multiple TRACON too. They can forget those too.

i suspect the explanation is simple. An underlying assumption that a light airplane doing multiple approaches for practice on a VFR day is probably VFR.
 
It happened to me once when we were doing practice approaches. I got a “squawk VFR frequency change approved” rather than a “frequency change approved, report IFR cancellation on…”. After I landed at the non-towered field, I called to clarify how we became VFR, and if not, that we cancelled IFR. It turns out it was a trainee working us who screwed up. No harm no foul. These things typically happen when you’re doing non-standard stuff like instrument training.
 
It’s habit to say “maintain VFR” but they actually mean maintain VMC or visual conditions. I think, but I’m not sure, that if they tell you maintain visual, they are not legally responsible for separation, so when you are IMC they are responsible and you suddenly become a priority for controllers.

I’ve departed airspace and delayed climbing due to clouds and I got called out on it twice, while we were both repeating maintain VFR. I think it all happened in a matter of 30 seconds. But I should have reported the weather conditions more promptly looking back on it. Just misjudged the distance and also experienced a door pop open on takeoff climb.
 
Yeah, I guess so. I just figured


1) Yes, I actually filed and picked up the clearance on the ground
2 and 3) It was within the same tracon, but it was not a local code, started with a 5 iirc

That's what makes me curious. The mixup would make more sense if it was a pop-up that got hand-jammed in there, but I filed well prior and picked up said clearance before takeoff. I figured that'd make as official as it gets.
Yep, sounds like an old fashioned brain fart then. I don't believe a vfr aircraft on flight following (or just tagged up to enter/leave class c) looks any different on the scope than an ifr. I don't know how they keep track of who's who, other than controllers are special people. It is a little surprising they would do that on a missed approach, and I agree that would be unsettling when you're busy in imc. As long as you're on a code though they shouldn't let you hit anyone, and a gentle reminder that you're ifr was the correct thing to do.

To answer your question I've had this 2 or 3 times in the 2 years I've been rated, and always while doing practice approaches.
 
I almost always fly IFR these days, but rarely in IMC. Dozens of times while on an IFR plan, when I get handed off to a new controller I've been asked, "What's your destination?" Much more rarely (maybe ~5 times) I've been treated like a VFR Flight Following flight until I reminded them I was IFR.

Overall, makes me wonder what info the controllers have/don't have readily at hand. Still happens often enough that it seems like there's a lot of room for improvement.
 
Yep, sounds like an old fashioned brain fart then. I don't believe a vfr aircraft on flight following (or just tagged up to enter/leave class c) looks any different on the scope than an ifr. I don't know how they keep track of who's who, other than controllers are special people. It is a little surprising they would do that on a missed approach, and I agree that would be unsettling when you're busy in imc. As long as you're on a code though they shouldn't let you hit anyone, and a gentle reminder that you're ifr was the correct thing to do.

To answer your question I've had this 2 or 3 times in the 2 years I've been rated, and always while doing practice approaches.
What it's going to look like in the Data Block on the Radar is going to vary from facility to facility, dependent on type of Radar they have and local procedure. Haven't seen him in a while, but @Radar Contact might pop in and give some examples of what they do in Chicago. @Timbeck2 could tell us what it may look like in Tuscon. @PastZTL has recent Center experience.
 
Last edited:
The data block may be irrelevant as what may have happened was that you had a trainee controller. Before they un-keyed did you hear another voice saying something like “He’s IFR you moron!”?

You guys have got to remember that controllers don’t come from a factory fully qualified to work somewhere. They have to be trained anywhere they go.

But to answer the question, VFR codes here start with 04. VFR with flight following starts with whatever the computer spits out. VFR data tags also have an asterisk after the call sign. IFR doesn’t.
 
Last edited:
The data block may be irrelevant as what may have happened was that you had a trainee controller. Before they un-keyed did you hear another voice saying something like “He’s IFR you moron!”?

You guys have got to remember that controllers don’t come from a factory fully qualified to work somewhere. They have to be trained anywhere they go.

But to answer the question, VFR tags here start with 04. VFR with flight following starts with whatever the computer spits out. VFR data tags also have an asterisk after the call sign. IFR doesn’t.
Think I've asked before but don't remember. Is it ARTS there, or STARS
 
Brain farts happen. I was once IFR but never heard the word "cleared" when I picked it up in the air.
 
Last edited:
I got cleared to land on 13R at JFK once when going over the top from NJ to CT. Mixed up handoff from NJ to JFK approach. Very relieved controller when I let him know that I was just passing through.
 
In the center environment ERAM will display your altitude for VFR F/F as VFR/075. For IFR it displays your altitude as 080. The only way I can think that it might get mixed up is if someone amended the altitude erroneously to an IFR altitude format and left out the VFR/ portion. Still, you'd wind up with an IFR data block that said the assigned altitude was 075, which should lead to questions.
 
I was doing a 500ish mile flight and a few TRACONs in, I got asked something about my flight, possibly altitude, or what approach I wanted into an uncontrolled, which indicated the controller thought I was IFR. Stated I was VFR and the response was the previous facility told him I was IFR.
 
Once you're getting radar services, the notion of IFR vs VFR is kept in the controllers head. Flying a +500 altitude (or having VFR in the altitude) is a hint but I've had it happen both ways to me (controllers thinking I was IFR and I wasn't and them forgetting I was IFR).
 
Did you get a clearance for the approach on your first leg , if not the controllers could have believed you were VFR also mistakes can happen
 
1) did you actually file, or just get a clearance from your local tracon?
2) was it a 0 code?
3)I assume "b" was within the same tracon?

The times this has happened to me have been when I just get a pop-up or practice clearance from my local tracon. They put you on a "local" txdr code beginning with a zero or one and without a strip in front of them, they forget that you're actually ifr. When I file a flight plan and they actually have a strip for me, I have better results. Any more, I file through leidos even if I'm just doing approaches at my home airport. It takes just a couple minutes, and saves that time negotiating with clearance. It also saves them typing in my info (I think?) and they seem to be happier about it.

curious- what’s a “zero code”? Code that starts with 0? What’s the significance?
 
curious- what’s a “zero code”? Code that starts with 0? What’s the significance?
"Here", airplanes that are staying within our local tracon or not getting FF are assigned a squawk starting with zero. My understanding is that these are assigned sequentially by the local controller, and not put into the national system. If you request FF later, you will be assigned a new code. I fly out of a class "c", so every airplane coming or going gets a code.
 
..they're just people. I think they're used to folks practicing approaches and the "maintain VFR" tag line afterwards. I've had similar instances as well

I'm also treated differently when I'm in a 172 vs a twin. To date I've never had a "line up and wait" in a 172 but get that often in twins. Wonder if they subconsciously treat those differently? Just assume the 172 is a student? I have similar anecdotal evidence of bravo clearances
 
Not all facilities use a zero at the front for a local. My old facility, we had 4501-4517 for local VFR FF & IFRs. Some faculties also have a different subset between local VFR & IFRs. The local subsets can’t be used for an inter facility handoff, hence the reason for an NAS assigned code if going XC.
 
Never happened to me. I’m impressed, actually, that controllers keep my IFR/VFR status straight with complete consistency.
 
In over 2000 hours of flying it’s only happened once where I was handed off to a controller who thought I was VFR.

On a more annoyingly frequent basis, I have on multiple occasions while IFR had controllers ask me while what my destination was. As in they knew I was IFR but had no clue where I was headed.
 
In over 2000 hours of flying it’s only happened once where I was handed off to a controller who thought I was VFR.

On a more annoyingly frequent basis, I have on multiple occasions while IFR had controllers ask me while what my destination was. As in they knew I was IFR but had no clue where I was headed.

Are they asking for the identifier, or where it actually is (city/state) ?
 
In over 2000 hours of flying it’s only happened once where I was handed off to a controller who thought I was VFR.

On a more annoyingly frequent basis, I have on multiple occasions while IFR had controllers ask me while what my destination was. As in they knew I was IFR but had no clue where I was headed.
That can happen, but it isn't that they don't know where your headed for the near future, just don't have your destination airport yet. It would happen occasionally in Socal. Highly structured route system. The Controller would know what your last clearance received was route and altitude wise, because of strict hand off procedures in Letter's of Agreement. And usually the Flight Progress Strip was already there but sometimes it wasn't. The only thing the Controller could see on the scope right then was maybe 'next fix.' Some Controllers would just ask destination. Some would start a search for the strip. That could be a little tedious at times and involve other Controllers and use up their time. And sometimes it would delay giving the aircraft a necessary reroute that would have been better to have been given now rather than a couple minutes from now.
 
Last edited:
I have been given vectors for an approach to an airport that was not on my IFR flight plan...
 
There was a DL aircraft that was right in the middle of DL arrival push, only he wasn't landing ATL. This was before we got the destination in the 4th line of the data block. Every controller thought, at least once, that it was an arrival. At least I gave him a PD descent to FL240 instead of vectors for spacing or a speed restriction. A couple of minutes later he told me he wasn't landing ATL <facepalm>. Ok, nevermind.
 
There was a DL aircraft that was right in the middle of DL arrival push, only he wasn't landing ATL. This was before we got the destination in the 4th line of the data block. Every controller thought, at least once, that it was an arrival. At least I gave him a PD descent to FL240 instead of vectors for spacing or a speed restriction. A couple of minutes later he told me he wasn't landing ATL <facepalm>. Ok, nevermind.
Story time. I was working Approach at Santa Barbara SBA. Center calls up with a handoff. Yeah, calls, this was many moons ago and we didn't have ARTS yet. He says 'treat this guy with kid gloves, he's mad.' I ask what happened, he say's don't have time now, I'll get back to you. United checks in descending to 9000 and oh yeah, his tone of voice was dripping with disgust. Tell him report the airport in sight, he does, I clear him for the Visual Approach, he reads it back, hate still dripping out of his voice. I give Tower the inbound, tell him Center done him wrong and he's still pizzed, I don't know what happened yet. Center calls about a half later and tells me what happened. There had been a crash at LAX that shut the South complex down, LAX is working at half capacity. This guy was from DEN which put him right in with the conga line going to LAX until an SBA gets peeled out somewhere around Hector HEC. But Center already has stacks going as far east as Arizona. This guy spent over half an hour in a stack at Peach Springs PGS before it got figured out he was going to SBA and coulda just kept on truckin'
 
My favorite is when they have no idea who I am when I get a handoff.

27K: Potomac Approach Navion 5327K level 5000.
(no answer, I try again several times).
27K: Center, Navion 5327K, nobody answers on 126.1.
CTR: Hold on... OK try again.
27K: Potomac Approach Navion 5327K level 5000.
PCT: Navion 5327K, say request.
27K: We were handed off to you.
PCT: Oh, how are you?
27K: Just fine, how are you?
 
Last edited:
Back
Top