Precise meaning of “continue downwind”

PeterNSteinmetz

Ejection Handle Pulled
Joined
Sep 9, 2015
Messages
2,653
Location
Tempe, AZ
Display Name

Display name:
PeterNSteinmetz
Question that hopefully someone with more exact knowledge of controller instructions can provide insight on.

Situation:

Plane enters downwind and is given a #4 landing clearance. After inquiry about plane ahead is told “cancel landing clearance, continue downwind”.

Does this also imply that the controller will call base? Or can the pilot turn base when judged appropriate for spacing?
 
I would ask, that's not a clear instruction IMO. I would answer, "Cancel landing clearance, continue downwind, are you calling my base?, bugsmasher xxxx."
 
Just keep flying downwind and expect them to call the base turn. If it’s not clear, simply ask...

How many pages will this turn out to be?
 
I've gotten that followed by something like "your traffic is an RJ on a five mile final." In most cases, since I'm flying away from the airport, I'll maintain altitude but slow significantly.
 
Well in your case, there’s nothing precise by that instruction because it’s poor phraseology. “Continue” is used when the controller is simply withholding clearance and can’t issue it at that time. There should be no pattern instruction with it, only to expect your clearance at a certain time. “Cessna 345 continue, expect clearance short final.” Or for you to report something “Piper 123 continue, report 2 mile final.”

Proper phraseology in your case would be “extend downwind” with possibly an instruction of “I’ll call your base.”
 
Last edited:
It means just what it says. Continue downwind or extend downwind. There will be more instructions later which might be "turn base" or to follow specific traffic.
 
It means just what it says. Continue downwind or extend downwind. There will be more instructions later which might be "turn base" or to follow specific traffic.

I have had them forget, though.
"how much farther do you want us to go? 123AB."
"Sorry about that, turn base now, cleared for the option runway XX"
 
I have had them forget, though.
"how much farther do you want us to go? 123AB."
"Sorry about that, turn base now, cleared for the option runway XX"

I'll just pipe up "Bugsmasher 6969, still downwind", that normally jogs their memory.
 
  • Like
Reactions: YKA
Here's what the Pilot/Controller Glossary has to say.
.
CONTINUE− When used as a control instruction should be followed by another word or words clarifying what is expected of the pilot. Example: “continue taxi,” “continue descent,” “continue inbound,” etc.

Downwind Leg− A flight path parallel to the landing runway in the direction opposite to landing. The downwind leg normally extends between the crosswind leg and the base leg​
.
Interestingly, the P/CG entry for "CONTINUE" doesn't actually say anything about what "continue" means other than to say that it can be used as a control instruction.
 
In El Paso, it means we are going to forget about you; fly straight into the Franklin mountains.
Well, about 15 years ago.
 
  • Like
Reactions: YKA
Question that hopefully someone with more exact knowledge of controller instructions can provide insight on.

Situation:

Plane enters downwind and is given a #4 landing clearance. After inquiry about plane ahead is told “cancel landing clearance, continue downwind”.

Does this also imply that the controller will call base? Or can the pilot turn base when judged appropriate for spacing?

We were asked to continue downwind. You shouldn't turn base unless you are expecting to land. There could be another airplane on a straight-in final.
 
Again, “continue downwind” is not proper phraseology from ATC. “Extend downwind” is.

06BEA8A3-01EA-42E1-9833-D442906C9C4E.jpeg AB91176B-76B4-4106-A9E5-CCE3D7234EFD.jpeg
 
Again, “continue downwind” is not proper phraseology from ATC. “Extend downwind” is.

View attachment 89247 View attachment 89248

Yup. Here’s where CONTINUE appears as you described above in post #7

a. Specific traffic pattern information (may be omitted if the aircraft is to circle the airport to the left).
PHRASEOLOGY−
ENTER LEFT/RIGHT BASE. STRAIGHT−IN.
MAKE STRAIGHT−IN. STRAIGHT−IN APPROVED. RIGHT TRAFFIC.
MAKE RIGHT TRAFFIC.
RIGHT TRAFFIC APPROVED.
CONTINUE.
NOTE−
Additional information should normally be issued with instructions to continue. Example: “continue, report one mile final”; “continue, expect landing clearance two mile final”; etc.
 
Question that hopefully someone with more exact knowledge of controller instructions can provide insight on.

Situation:

Plane enters downwind and is given a #4 landing clearance. After inquiry about plane ahead is told “cancel landing clearance, continue downwind”.

Does this also imply that the controller will call base? Or can the pilot turn base when judged appropriate for spacing?

You should not turn base on your own without further communication. The moment you do you will have violated your last instruction received. If he had simply said continue, that changes things. But he said continue downwind, which we now know is not the correct thing to say. But it is an instruction nonetheless.
 
I sometimes receive a "continue on right downwind" instruction from the tower at my home field. It's always for sequencing. They tell me when to turn base. And, no, they've never forgotten me.

It's a Joint Base runway with F-16 and C-5 traffic as well as GA traffic. The military pilots often practice "unique" approaches that I suspect are used in hostile areas. Given these unusual approaches and the huge variations in speeds, the timing and separation can be tricky for the controllers.
 
Here's what the Pilot/Controller Glossary has to say.
.
CONTINUE− When used as a control instruction should be followed by another word or words clarifying what is expected of the pilot. Example: “continue taxi,” “continue descent,” “continue inbound,” etc.

Downwind Leg− A flight path parallel to the landing runway in the direction opposite to landing. The downwind leg normally extends between the crosswind leg and the base leg​
.
Interestingly, the P/CG entry for "CONTINUE" doesn't actually say anything about what "continue" means other than to say that it can be used as a control instruction.
If not specifically defined,
Here's what the Pilot/Controller Glossary has to say.
.
CONTINUE− When used as a control instruction should be followed by another word or words clarifying what is expected of the pilot. Example: “continue taxi,” “continue descent,” “continue inbound,” etc.

Downwind Leg− A flight path parallel to the landing runway in the direction opposite to landing. The downwind leg normally extends between the crosswind leg and the base leg​
.
Interestingly, the P/CG entry for "CONTINUE" doesn't actually say anything about what "continue" means other than to say that it can be used as a control instruction.
Since the intended meaning is the common meaning--to maintain without interruption a condition, course, or action--no further definition is required.
 
Have had this happen several times at KFCM on the parallels. Its always "Extend" and in all but one memorable case the instruction also included they would be calling the base.
 
Have had this happen several times at KFCM on the parallels. Its always "Extend" and in all but one memorable case the instruction also included they would be calling the base.

So how far downwind did you go in that “one memorable case” before you finally said ‘Yo, Tower, remember me.’:D
 
  • Like
Reactions: YKA
I think the question has pretty well been answered, but the situation presents a good example of why situational awareness is useful. You may be on right downwind, but someone else is on an extended left base, and someone else is on an extended final leg. With a canceled landing clearance and an instruction to continue, you should expect to extend your downwind. When you get to the normal point to turn base, you should expect additional instruction, and if none is received, you should evaluate who is where and query the controller if your sequence in the pattern isn't clear.
 
I think the question has pretty well been answered, but the situation presents a good example of why situational awareness is useful. You may be on right downwind, but someone else is on an extended left base, and someone else is on an extended final leg. With a canceled landing clearance and an instruction to continue, you should expect to extend your downwind. When you get to the normal point to turn base, you should expect additional instruction, and if none is received, you should evaluate who is where and query the controller if your sequence in the pattern isn't clear.

Or the runup area is filling up and they gotta get some departures out. Love a Controller who just says 'leave me room for one departure" instead of doing the 'extend downwind, I'll call your base' boogie.'
 
This says you're no longer number 4. You have no clearance to the runway.

So, fly your current heading and wait for instructions.
I agree, but would change one word. Change "clearance" to "sequence".

I would make that change so as not to imply that a clearance to the runway is required. The only required clearance, for an arriving VFR aircraft, is the landing clearance followed by a taxi clearance. [14 CFR 91.129(i)]
 
I got a weird one from tower the other day. "396, check your altitude" I was totally confused as to what that meant. I was shooting an approach and I was way above the glideslope, but they had me panicking that I was about to run into something. My instructor responded with our current altitude, which I guess is what the tower wanted.
 
#4 landing clearance. After inquiry about plane ahead is told “cancel landing clearance, continue downwind”.

I agree, but would change one word. Change "clearance" to "sequence".

He had been cleared #4, so clearance is the correct word. If he had only been told he was #4, but not cleared to land, I would agree with you.
 
I got a weird one from tower the other day. "396, check your altitude" I was totally confused as to what that meant. I was shooting an approach and I was way above the glideslope, but they had me panicking that I was about to run into something. My instructor responded with our current altitude, which I guess is what the tower wanted.

How far above the glide slope is "way above" I would not want to be way above the glide slope. If you are flying the approach you have to go misted if you have full deflection. Not that you did. Just a idea of why they might ask something like that..
 
In El Paso, it means we are going to forget about you; fly straight into the Franklin mountains.
Well, about 15 years ago.

I think that was way more than 15 years ago if you're talking about the night flight CFIT where ABQ used to take Tower control functions years ago.;) If it's the one I'm thinking of, plane asked for a westbound departure and was approved, but didn't warn the pilot about the mountain...

This was big during my training in 2006-2007 as my middle aged CFI said he was the FBO fueler for that flight just out of high school
 
How far above the glide slope is "way above" I would not want to be way above the glide slope. If you are flying the approach you have to go misted if you have full deflection. Not that you did. Just a idea of why they might ask something like that..
A few hundred feet, and we weren't even to the FAF yet. I think we were still more than 1500 feet AGL. My instructor says he thinks they lose radar contact in that area because he gets asked a lot right in that area.
 
A few hundred feet, and we weren't even to the FAF yet. I think we were still more than 1500 feet AGL. My instructor says he thinks they lose radar contact in that area because he gets asked a lot right in that area.
I'm just a 200 hour pilot, waiting to take may IFR check ride. (hopefully next week!) But from my very limited experience I believe you should be under the glide slope if your still out past the FAF. I was taught to intercept the glide slope from below then fallow it down.
 
I'm just a 200 hour pilot, waiting to take may IFR check ride. (hopefully next week!) But from my very limited experience I believe you should be under the glide slope if your still out past the FAF. I was taught to intercept the glide slope from below then fallow it down.
Well, when you're on an IFR flight plan, you don't always get to fly the approach the way it's published. This was in fairly busy airspace. They didn't clear me to descend until a few minutes prior. And I'm a student, so I'm not yet a pro at grabbing the glideslope quickly, especially when it's not "by the numbers". They also made me go missed shortly after the FAF, so it wasn't a very textbook approach all the way 'round.
 
He had been cleared #4, so clearance is the correct word. If he had only been told he was #4, but not cleared to land, I would agree with you.
But the landing clearance, or lack thereof, has nothing to do with the flying part. You don't need a landing clearance to turn or fly base or even final. The important part is that he was instructed to continue [maybe should have been extend] downwind. He has to follow that instruction whether he has a landing clearance or not.
 
Well, when you're on an IFR flight plan, you don't always get to fly the approach the way it's published. This was in fairly busy airspace. They didn't clear me to descend until a few minutes prior. And I'm a student, so I'm not yet a pro at grabbing the glideslope quickly, especially when it's not "by the numbers". They also made me go missed shortly after the FAF, so it wasn't a very textbook approach all the way 'round.

That's good stuff Salty, that's what it's like around here a lot of times, good to get it with some one at your side.
 
A lot of arguing about whether, "Continue" or "Extend" is correct phraseology. Doesn't seem to matter to me...both are equally vague and mean about the same thing.

At PAO, I've always heard "Extend". It's a common request. It can be nerve-wracking trying to figure out the controllers intent, as right downwind for 31, the most common place to be, runs straight into NUQ (Moffett). Unless you're local, you may not know that there's an LoA that gives up a chunk of NUQ's airspace to PAO almost permanently. Shoreline Amphitheater defines this line. If you're not local and get the instruction very close to the charted Delta, it may be very confusing. To make matters worse, the same LoA allows "extensions into Moffett" at the mutual agreement of the two towers. Which is confusing, because there's already a standing extension into Moffett. What "extensions into Moffett" means is all the way to Hangar One, which is solidly inside the pattern at KNUQ. Usually, you'll be told about "extensions into Moffett" when being asked to "Extend downwind" if they are in place.

The confusing part is coming close to Shoreline without acknowledged extensions on an extend instruction and basically being boxed in with no good outs. Worse, PAO gets busy enough that interjecting a timely question can become impossible. (This is especially true when being asked to extend, of course.) Even more confusing is that "I'll call you base" is also a common instruction that may or may not be included with "extend downwind". (So, by not saying that, do you mean I should turn base at my discretion?) Often the instructions come abeam the numbers, with what looks like plenty of time. So, you may not worry too much about it yet or ask for clarification, because it doesn't seem to matter. Then...that invisible wall starts looming and you're hoping some instruction comes soon in the flurry of instructions being sent out as the controller attempts to keep the very busy pattern in line.

Eh, I don't know where I'm going with this other than to indicate it's a common issue.
 
When you find yourself 9 nm out, you may want to inquire about turning base
 
Love a Controller who just says 'leave me room for one departure" instead of doing the 'extend downwind, I'll call your base' boogie.'

Love a pilot that will do it and not turn in too quick or fly 4 miles out before turning base. Its easier just to call their base so it isn't left up to the pilot to decide. I've forgotten ONCE about someone on an extended downwind and it was a Citation 550...once, and that was about 22 years ago.
 
Back
Top