cheap scanner or radio for CTAF

alanbreck

Pre-Flight
Joined
May 15, 2015
Messages
78
Display Name

Display name:
AlanB
I'd like to have some sort of radio/scanner set up in my hangar, with a speaker, so that I can monitor CTAF while I'm hanging out there.
What ideas do people have to accomplish this as budget-friendly as possible? Any homebuilt or kitbash ideas? Or are there cheapo radios out there that can pick up VHF?

Thanks.
 
Check craigslist for a scanner, make sure it works before you trade cash. If it’s inside a metal hangar, highly suggest you get a external antenna. The siding acts as a faraday cage.
 
Pretty much any scanner sold for decades now has air band, just want to make sure you can program it to monitor the specific frequencies you want to hear. It will work best if you can mount an antenna outside, especially if you are in a metal hangar like most of us.
 
If you don’t need a scanner, just a receiver. Find and old radio someone pulled from their airplane and wire it up in a box. Just need a 12 volt power source and a speaker.

Brian

This
 
Look at a Sporty's Air Scan. You can find used ones on Ebay at a lower price.
https://www.sportys.com/pilotshop/sporty-s-air-scan.html

I have a little mancave at the airport. I thought this Sporty's scanner would be nice to have in there. It was absolutely horrible!
It was so much static you couldn't understand anything. My Yaesu handheld works fine in the same room. I sent the scanner back to Sporty's. It is basically cheap junk...
 
I bought a Cheapo UNIDEN scanner off ebay. It went for $10 or something because the guy said it wouldn't scan. I didn't care because it was going to permanently set at 122.9 (it feeds the speakers on the party deck). It turns out the seller just was an idiot because the unit works fine in all its features. Just make sure you get a model with the airband. Not all have them.
 
I've never seen a "police" scanner made since 1990 that didn't cover aircraft band. These things have to be $5 at yard sales by now. I have a couple I picked up that way, and they work great.

Note, however, that using the included telescopic whip antenna in a metal hangar will offer disappointing performance, and leaving it connected to a rooftop ground plane works great, but only till the first thunderstorm.
 
For really home 'built'(ok, assembled), take a Raspberry Pi, hook up an RTL-SDR stick to it and use RTLSDR-Airband as a scanner. Of course, then you still have to figure out a way to output the noise. For extra points figure out how to feed LiveATC if you have an internet connection and your area doesn't have a feed.

The one on the end of my house with the big-ass marine antenna to receive AIS also receives the local airport through multiple USB sticks.
 
I have a little mancave at the airport. I thought this Sporty's scanner would be nice to have in there. It was absolutely horrible!
It was so much static you couldn't understand anything. My Yaesu handheld works fine in the same room. I sent the scanner back to Sporty's. It is basically cheap junk...

I’m glad you posted this. I too have the Sporty’s scanner and it’s awful. It never worked well at home but I figured I was just too far away. I took it to Oshkosh and couldn’t pick up any transmissions on the field. Junk. Unfortunately returning is not an option. Yaesu handheld works perfectly for me too.
 
I have a little mancave at the airport. I thought this Sporty's scanner would be nice to have in there. It was absolutely horrible!
It was so much static you couldn't understand anything. My Yaesu handheld works fine in the same room. I sent the scanner back to Sporty's. It is basically cheap junk...

I’m glad you posted this. I too have the Sporty’s scanner and it’s awful. It never worked well at home but I figured I was just too far away. I took it to Oshkosh and couldn’t pick up any transmissions on the field. Junk. Unfortunately returning is not an option. Yaesu handheld works perfectly for me too.
Describes a good portion of Sporty’s products.

Overpriced. Junk.
 
My freshman or sophomore year of college, I bought a "diy assembly" kit for an air band receiver from Radio Shack. It came with a circuit board, a few components that you had to solder onto the board, and a really 'tinny' built-in speaker. I think it had a headphone-sized output jack, though. Ran off of 9v battery. I got extra credit in my Physics class for building it on a whim and being able to somewhat explain how the rheostat changed the reception frequency. That was only 20(ish) years ago. I wonder where that thing is now...
 
I've never seen a "police" scanner made since 1990 that didn't cover aircraft band. These things have to be $5 at yard sales by now. I have a couple I picked up that way, and they work great.
Quite a few older ones do not. You need to be careful. It's not that they couldn't cover the frequency, but they didn't have an AM demodulator in them. These days you get a whizbang AM/FM/WFM demod in the thing so you can listen to Airband, regular FM, etc...
 
I'm looking into this. There was a group of Ham radio guys that were building small aircraft radio receivers at Kidventure at OSH this year. It was very small, like business card size. I found another on line - might be the same thing, but the schematic is pretty hard to read:

https://aircraftreceiver.blogspot.com/
 
Last edited:
Back
Top