Finding more work.

I'd Bet that the number of freelanced A&P's that can do that is very low.

Simply because we choose to not deal with those we can't trust.

True ... am sure you can get a pretty good idea of the owner's personality after the first job.
 
True ... am sure you can get a pretty good idea of the owner's personality after the first job.
I don't care if they are a pri-k as long as they pay the bill, and take my advice. :)
 
I don't care if they are a pri-k as long as they pay the bill, and take my advice. :)

Tom,

As a fellow A&P/IA now retired I take exception. I can advise owners about thing that should be done in the interest of keeping their plane in airworthy condition but under the regs I have no way to enforce that shirt of asking an inspector to confirm my judgement. I have only once had to do that when I found some countersunk rivets in the wings of a Cherokee Arrow. After fifteen minutes of looking the ASI hung a condition notice on the plane effectively grounding it. The plane was one of those fresh paint and interior and the nosegear trunion had scrape marks on it that indicated a nose gear up landing. No way in hell was I going to put my signature in the logs or let my purchaser but the plane even though he was smitten by paint and interior.

Bottom line was the previous IA who signed it off as airworthy lost his certificate. My right under the FAR's is higher priority than his.

Oh, yes, I have dealt with less than desirable customers. When they ask for an annual I am too busy to accommodate them.
 
Tom,

As a fellow A&P/IA now retired I take exception. I can advise owners about thing that should be done in the interest of keeping their plane in airworthy condition but under the regs I have no way to enforce that shirt of asking an inspector to confirm my judgement. I have only once had to do that when I found some countersunk rivets in the wings of a Cherokee Arrow. After fifteen minutes of looking the ASI hung a condition notice on the plane effectively grounding it. The plane was one of those fresh paint and interior and the nosegear trunion had scrape marks on it that indicated a nose gear up landing. No way in hell was I going to put my signature in the logs or let my purchaser but the plane even though he was smitten by paint and interior.

Bottom line was the previous IA who signed it off as airworthy lost his certificate. My right under the FAR's is higher priority than his.

Oh, yes, I have dealt with less than desirable customers. When they ask for an annual I am too busy to accommodate them.
I'm at the age where if a customer doesn't want to take my advice they can take their business else where.

Don't need their sh-t, If you know what I mean.
 
I'm at the age where if a customer doesn't want to take my advice they can take their business else where.

Don't need their sh-t, If you know what I mean.
Tom I like that. I have run into things like that before. I once had a customer tell me the shimmy on the nose of their 172 was not being caused by the wore out bearings on their scissor links. (like 3/4 inch play both ways) They got made when I suggested we remove them and inspect the links, hardware and bushings. So they went on down the road. This can be such a tough business when every bodies personality requires them to always be right.
 
Tom I like that. I have run into things like that before. I once had a customer tell me the shimmy on the nose of their 172 was not being caused by the wore out bearings on their scissor links. (like 3/4 inch play both ways) They got made when I suggested we remove them and inspect the links, hardware and bushings. So they went on down the road. This can be such a tough business when every bodies personality requires them to always be right.
When that guy comes down my road, I have him push down on the stab while I shake the hell out of the nose strut, after he lets the nose down again I tell him he needs a whole new strut. and ask why his old mechanic allowed him to get this bad.
I usually never see them again.
 
Tom....I hope you find more work, pal. :D
I'm at the age where if a customer doesn't want to take my advice they can take their business else where.

Don't need their sh-t, If you know what I mean.
 
All of this is why you never, ever give your aircraft logbooks to any mechanic you’re not 110% confident in. Get the work done, get a sticker with the required entry on it, and put it in the books yourself.
You ain't getting a sticker from me. If I can't sign the book it was never done. Now get out of my shop.
 
Back
Top